AC-DC SINGLE OUTPUT   PAGE1   PAGE2   PAGE3    PAGE4   PAGE5   PAGE6

S-240 SERIES

Low price and high reliability 105℃ output capacitor 　 AC input power suitable for the world 　 High efficiency and low operation temperature 　 Soft-start current can reduce the AC input impact effectively 　 With short-circuit and overload protection 　 100% full-load burning test 　 Installed with EMI filter, minimum wave 　 INDEX TYPE S-240 DC VOLTAGE 5V 12V 15V 18V 24V 27V 48V VOLTAGE ADJ.RANGE ±10% ±10% ±10% ±10% ±10% ±10% ±10% VOLTAGE TOLERANCE ±2% ±1% ±1% ±1% ±1% ±1% ±1% RATED CURRENT 40A 18A 15A 13A 10A 8A 5A CURRENT RANGE 0-40A 0-18A 0-15A 0-13A 0-10A 0-8A 0-5A RATED POWER 200W 216W 225W 234W 240W 216W 240W EFFICIENCY(Typ.) 78% 82% 83% 80% 84% 85% 87% RIPPLE&NOISE(MAX.) 120mvp-p 120mvp-p 150mvp-p 150mvp-p 180mvp-p 180mvp-p 240mvp-p LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% VOLTAGE RANGE 220VAC±20% 47-63Hz AC CURRENT 2.2A/220V INRUSH CURRENT(MAX.) 36A/230VAC LEAKAGE CURRENT <3.5mA/240VAC OVERLOAD PROTECTION 150-170% output cutout auto recovery OVERVOLTAGE PROTECTION -- OVERTEMPERATURE PROTECTION -- TEMP.COEFFICIENT -- SETUP.RISE,HOLD TIME 1ms 20ms 10ms/230VAC WITHSTAND VOLTAGE I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC ISOLATED RESISTOR I/P-O/P,I/P-FG,O/P-FG:500VDC/100MΩ STORAGE TEMP.HUMIDITY -10℃-60℃,20%-90%RH WEIGHT 1.1Kg SAFETY STANDARDS UL1950 TUVEN60950 EMC EN55022 CLASSB EN61000-4，2,3,4 EN60555-2,3 Note： 1.All parameters NOT specially mentioned are measured at 230VAC input ,rated load and 25 of ambient temperature. 2.Tolerance:includes set up tolerance, line regulation and load regulation 3.Ripple&noise are measured at 20MHZ of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor. 4.line regulation:min&max voltage of the rated load. 5.load regulation:load from 0 to 100%.

S-240A SERIES

Low price and high reliability 105℃ output capacitor 　 AC input power suitable for the world 　 High efficiency and low operation temperature 　 Soft-start current can reduce the AC input impact effectively 　 With short-circuit and overload protection 　 100% full-load burning test 　 Installed with EMI filter, minimum wave 　 INDEX TYPE S-240 DC VOLTAGE 5V 12V 15V 18V 24V 27V 48V VOLTAGE ADJ.RANGE ±10% ±10% ±10% ±10% ±10% ±10% ±10% VOLTAGE TOLERANCE ±2% ±1% ±1% ±1% ±1% ±1% ±1% RATED CURRENT 40A 18A 15A 13A 10A 8A 5A CURRENT RANGE 0-40A 0-18A 0-15A 0-13A 0-10A 0-8A 0-5A RATED POWER 200W 216W 225W 234W 240W 216W 240W EFFICIENCY(Typ.) 78% 82% 83% 80% 84% 85% 87% RIPPLE&NOISE(MAX.) 120mvp-p 120mvp-p 150mvp-p 150mvp-p 180mvp-p 180mvp-p 240mvp-p LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% VOLTAGE RANGE 220VAC±20% 47-63Hz AC CURRENT 2.2A/220V INRUSH CURRENT(MAX.) 36A/230VAC LEAKAGE CURRENT <3.5mA/240VAC OVERLOAD PROTECTION 150-170% output cutout auto recovery OVERVOLTAGE PROTECTION -- OVERTEMPERATURE PROTECTION -- TEMP.COEFFICIENT -- SETUP.RISE,HOLD TIME 1ms 20ms 10ms/230VAC WITHSTAND VOLTAGE I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC ISOLATED RESISTOR I/P-O/P,I/P-FG,O/P-FG:500VDC/100MΩ STORAGE TEMP.HUMIDITY -10℃-60℃,20%-90%RH WEIGHT 1.1Kg SAFETY STANDARDS UL1950 TUVEN60950 EMC EN55022 CLASSB EN61000-4，2,3,4 EN60555-2,3 Note： 1.All parameters NOT specially mentioned are measured at 230VAC input ,rated load and 25 of ambient temperature. 2.Tolerance:includes set up tolerance, line regulation and load regulation 3.Ripple&noise are measured at 20MHZ of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor. 4.line regulation:min&max voltage of the rated load. 5.load regulation:load from 0 to 100%.

S-320 SERIES

Low price and high reliability 105℃ output capacitor 　 AC input power suitable for the world 　 High efficiency and low operation temperature 　 Soft-start current can reduce the AC input impact effectively 　 With short-circuit and overload protection 　 100% full-load burning test 　 Installed with EMI filter, minimum wave 　 Model 　 Performance S-320-5 S-320-7.5 S-320-12 S-320-13.5 S-320-15 S-320-24 S-320-27 S-320-48 DC output voltage 5V 7.5V 12V 13.5V 15V 24V 27V 48V Output voltage error(Note:2) ±2% ±2% ±1% ±1% ±1% ±1% ±1% ±1% Rated output current 50A 36A 25A 22A 20A 12.5A 11A 6.5A Output current rage 0-50A 0-36A 0-25A 0-22A 0-20A 0-12.5A 0-11A 0-6.5A Wave and noise(Note:3) 150mVp-p 150mVp-p 180mV 180mV 180mV 180mV 240mV 240mV Inlet stability(Note:4) ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Load stability(Note:5) ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% DC output power 250W 270W 300W 297W 300W 300W 297W 312W Efficiency 77% 80% 82% 83% 84% 86% 86% 87% Adjustable range for DC voltage 4.5-5.7V 6-9V 10-13.2V 12-15V 13.5-18V 20-26.4V 26-32V 41-56V Range for input voltage 88~132VAC/176~264VAC SELECTED BY JUMPER OR SWITCH 47~63Hz;248~370VDC Input current 6A/115V 3.5A/230V Impact current 20A/115V 40A/230V Leakage current <3.5mA/240VAC Overload protection 105%~135% TYPE: PULSING HICCUP SHUTDOWN RESET: AUTO RECOVERY Over-voltage protection 5.75-6.75V 9.4-10.9V 13.8-16.2V 15.5-18.2V 18-21V 27.6-32.4V 33.7-39.2V 57.6-67.2V High-temperature protection RTH1>=65℃ FAN ON<=55℃ FAN OFF>=70℃ Cut off output (5~15V)OUTPUT SHUTDOWN Temperature factor ±0.03%℃(0~50℃) Start, rise and lock time 2s,20ms,20ms Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft Resistance to pressure Input and output internal:3KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC Isolation resistance Input and output internal, input and enclosure, Output and enclosure:500VAC/100M Ohms Operating temperature and humidity -10℃~+60℃，20%~90%RH Store temperature and humidity -20℃~+85℃,10%~95%%RH Overall dimension 215*115*50mm Weight 1.15Kgs Safety standard Meet UL1950 EMC standard …… Note:1.The testing condition for the parameter above is :230VAC input, rated load, 25℃ 70% RH.Humidity 　　 2.Error.include the setting error, line stability and load stability.(Note:5) 　　 3.Wave test: adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 　　 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 　　 5.Load stability test: The load is from 0% to 100% 　　 6.C3,4,41 must be knocked down.

AC-DC SINGLE OUTPUT   PAGE1   PAGE2   PAGE3    PAGE4   PAGE5   PAGE6