AC-DC SINGLE OUTPUT   PAGE1   PAGE2   PAGE3    PAGE4   PAGE5   PAGE6

S-15 SERIES

Low price and high reliability 105℃ output capacitor 　 AC input power suitable for the world 　 High efficiency and low operation temperature 　 Soft-start current can reduce the AC input impact effectively 　 With short-circuit and overload protection 　 100% full-load burning test 　 Installed with EMI filter, minimum wave 　 Model Performance S-15-5 S-15-12 S-15-24 DC output voltage 5V 12V 24V Output voltage error(Note:2) ±2% ±1% ±1% Rated output current 3A 1.3A 0.7A Output current rage 0-3A 0-1.3A 0-0.7A Wave and noise(Note:3) 50mVp-p 50mVp-p 100mVp-p Inlet stability(Note:4) ±0.5% ±0.5% ±0.5% Load stability(Note:5) ±1% ±0.5% ±0.5% DC output power 15W 15.6W 16.8W Efficiency 65% 68% 72% Adjustable range for DC voltage ±10.5% ±10% ±10% Range for input voltage 85~132VAC/170~264VACswitch choice Input current 0.5A/115V 0.25A/230V Impact current Cool-start current15A/115V 30A/230V Leakage current <0.5mA/240VAC Overload protection 105%~150%Model:FOLDBACK:current limit reset: self-reset Over-voltage protection …… High-temperature protection …… Temperature factor ±0.02%℃(0~50℃) Start, rise and lock time 200ms,100ms,30ms Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft Resistance to pressure Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC Isolation resistance Input and output internal, input and enclosure, Output and enclosure:0500VAC/100M Ohms Operating temperature and humidity -10℃~+60℃，20%~90%RH Store temperature and humidity -20℃~+85℃,10%~95%RH Overall dimension 99*97*35mm Weight 0.3Kgs Safety standard Conform to requirement in UL1012(NOT APPLY FOR THE MARK) EMC standard Conform to condition CLASS B,FCC PART15 J Note:1.The testing condition for the parameter above is :230VAC input, rated load, 25℃ 70% RH.Humidity 　　 2.Error.include the setting error, line stability and load stability.(Note:5) 　　 3.Wave test: adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 　　 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 　　 5.Load stability test: The load is from 0% to 100%

S-25 SERIES

Low price and high reliability 105℃ output capacitor 　 AC input power suitable for the world 　 High efficiency and low operation temperature 　 Soft-start current can reduce the AC input impact effectively 　 With short-circuit and overload protection 　 100% full-load burning test 　 Installed with EMI filter, minimum wave 　 Model Performance S-25-5 S-25-12 S-25-15 S-25-24 DC output voltage 5V 7.5V 12V 24V Output voltage error(Note:2) ±2% ±1% ±1% ±1% Rated output current 5A 2.1A 1.7A 1.1A Output current rage 0-5A 0-2.1A 0-1.7A 0-1.1A Wave and noise(Note:3) 50mVp-p 100mVp-p 100mVp-p 100mVp-p Inlet stability(Note:4) ±0.5% ±0.5% ±0.3% ±0.2% Load stability(Note:5) ±1% ±0.5% ±0.3% ±0.2% DC output power 25W 25.2W 25.5W 26.4W Efficiency 72%/115VAC 76%/115VAC 77%/115VAC 80%/115VAC Adjustable range for DC voltage +10,-5% ±10% ±10% ±10% Range for input voltage 85~264VAC/47~63VAC;120~370VDC Input current 0.6A/115V 0.35A/230V Impact current Cool-start current15A/115V 30A/230V Leakage current <0.75mA/240VAC Overload protection 105%~150% TYPE: PULSING HICCUP SHUTDOWN RESET: self-reset Over-voltage protection 115%~135% High-temperature protection …… Temperature factor ±0.03%℃(0~50℃) Start, rise and lock time 800ms,50ms,20ms/115VAC 300ms,50ms,80ms/230VAC Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft Resistance to pressure Input and output internal:3KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC Isolation resistance Input and output internal, input and enclosure, Output and enclosure:500VAC/100M Ohms Operating temperature and humidity -10℃~+60℃，20%~90%RH Store temperature and humidity -20℃~+85℃,10%~95%RH Overall dimension 99*97*35mm Weight 0.37Kgs Safety standard Meet UL1012,TUV EN60950 EMC standard Conform to IEC801-2,3,4,IEC555-2 Note:1.The testing condition for the parameter above is :230VAC input, rated load, 25℃ 70% RH.Humidity 　　 2.Error.include the setting error, line stability and load stability.(Note:5) 　　 3.Wave test: adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 　　 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 　　 5.Load stability test: The load is from 0% to 100% 　　 6.C6 must be knocked down.

S-35 SERIES

Low price and high reliability 105℃ output capacitor 　 AC input power suitable for the world 　 High efficiency and low operation temperature 　 Soft-start current can reduce the AC input impact effectively 　 With short-circuit and overload protection 　 100% full-load burning test 　 Installed with EMI filter, minimum wave 　 Model Performance S-35-5 S-35-12 S-35-15 S-35-24 DC output voltage 5V 12V 15V 24V Output voltage error(Note:2) ±2% ±1% ±1% ±1% Rated output current 7A 3A 2.4A 1.5A Output current rage 0-7A 0-3A 0-2.4A 0-1.5A Wave and noise(Note:3) 75mVp-p 100mVp-p 100mVp-p 100mVp-p Inlet stability(Note:4) ±0.5% ±0.5% ±0.5% ±0.5% Load stability(Note:5) ±1% ±0.5% ±0.5% ±0.5% DC output power 35W 36W 36W 36W Efficiency 70% 76% 78% 78% Adjustable range for DC voltage ±10.5% ±10% ±10% ±10% Range for input voltage 85~132VAC/170~264VACswitch choice Input current 0.8A/115V 0.45A/230V Impact current Cool-start current18A/115V 36A/230V Leakage current <0.5mA/240VAC Overload protection Foldback 105%~150%Model:FOLDBACK:current limit reset: self-reset Over-voltage protection …… High-temperature protection …… Temperature factor ±0.03%℃(0~50℃) Start, rise and lock time 200ms,100ms,30ms Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft Resistance to pressure Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC Isolation resistance Input and output internal, input and enclosure, Output and enclosure:0500VAC/100M Ohms Operating temperature and humidity -10℃~+60℃，20%~90%RH Store temperature and humidity -20℃~+85℃,10%~95%RH Overall dimension 129*98*38mm Weight 0.4Kgs Safety standard Conform to requirement in UL1012 EMC standard Conform to condition CLASS B,FCC PART15 J Note:1.The testing condition for the parameter above is :230VAC input, rated load, 25℃ 70% RH.Humidity 　　 2.Error.include the setting error, line stability and load stability.(Note:5) 　　 3.Wave test: adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 　　 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 　　 5.Load stability test: The load is from 0% to 100%

AC-DC SINGLE OUTPUT   PAGE1   PAGE2   PAGE3    PAGE4   PAGE5   PAGE6