AC-DC SINGLE OUTPUT   PAGE1   PAGE2   PAGE3    PAGE4   PAGE5   PAGE6

S-100 SERIES

Low price and high reliability 105℃ output capacitor 　 AC input power suitable for the world 　 High efficiency and low operation temperature 　 Soft-start current can reduce the AC input impact effectively 　 With short-circuit and overload protection 　 100% full-load burning test 　 Installed with EMI filter, minimum wave 　 Model 　 Performance S-100-3 S-100-5 S-100-7-5 S-100-12 S-100-15 S-100-24 S-100-27 S-100-48 DC output voltage 3V 5V 7.5V 12V 15V 24V 27V 48V Output voltage error(Note:2) ±2% ±2% ±1% ±1% ±1% ±1% ±1% ±1% Rated output current 20A 20A 13.6A 8.5A 6.7A 4.5A 3.7A 2A Output current rage 0-20A 0-20A 0-13.6A 0-8.5A 0-6.7A 0-4.5A 0-3.7A 0-2A Wave and noise(Note:3) 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p Inlet stability(Note:4) ±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% Load stability(Note:5) ±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% DC output power 60W 100W 102W 102W 100.5W 108W 99.9W 96W Efficiency 70% 78% 80% 81% 81% 84% 84% 84% Adjustable range for DC voltage 2.85-3.3V 4.75-5.5V 6.75-8.25V 10.8-13.2V 13.5-16.5V 21.6-26.4V 26-32V 43.2-52.8V Range for input voltage 85~132VAC/1800~264VACswitch choice Input current 2.4A/112V 1.2A/230V Impact current Cool-start current30A/115V 60A/230V Leakage current <1mA/240VAC Overload protection 105~150% 150~200% 105~150% TYPE RESET: RECYCLE AC ON/OFF Over-voltage protection …… High-temperature protection …… Temperature factor ±0.03%℃(0~50℃) Start, rise and lock time 200ms,100ms,30ms Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft Resistance to pressure Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC Isolation resistance Input and output internal, input and enclosure, Output and enclosure:0500VAC/100M Ohms Operating temperature and humidity -10℃~+60℃，20%~90%RH Store temperature and humidity -20℃~+85℃,10%~95%RH Overall dimension 199*98*38mm Weight 0.5Kgs Safety standard Conform to requirement in UL1012 EMC standard …… Note:1.The testing condition for the parameter above is :230VAC input, rated load, 25℃ 70% RH.Humidity 　　 2.Error.include the setting error, line stability and load stability.(Note:5) 　　 3.Wave test: adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 　　 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 　　 5.Load stability test: The load is from 0% to 100%

S-100F SERIES

Low price and high reliability 105℃ output capacitor 　 AC input power suitable for the world 　 High efficiency and low operation temperature 　 Soft-start current can reduce the AC input impact effectively 　 With short-circuit and overload protection 　 100% full-load burning test 　 Installed with EMI filter, minimum wave Model 　 Performance S-100F-5 S-100F-7.5 S-100F-12 S-100F-15 S-100F-24 S-100-48 DC output voltage 5V 7.5V 12V 15V 24V 48V Output voltage error(Note:2) ±2% ±1% ±1% ±1% ±1% ±1% Rated output current 20A 13.5A 8.5A 6.7A 4.5A 2.2A Output current rage 0-20A 0-13.5A 0-8.5A 0-6.7A 0-4.5A 0-2.2A Wave and noise(Note:3) 100mVp-p 125mVp-p 125mVp-p 125mVp-p 150mVp-p 150mVp-p Inlet stability(Note:4) ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Load stability(Note:5) ±1% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% DC output power 100W 101W 102W 100.5W 108W 105.6W Efficiency 76% 76% 80% 81% 83% 84% Adjustable range for DC voltage +10% ±10% ±10% ±10% ±10% ±10% Range for input voltage 85~132VAC/176~264VAC SELECTED BY JUMPER OR SWITCH 47~63Hz;255~370VDC Input current 2.4A/115V 1.2A/230V Impact current Cool-start current 35A/115V 60A/230V Leakage current <1mA/240VAC Overload protection 105%~150% TYPE: PULSING HICCUP SHUTDOWN RESET: reset:self-reset Over-voltage protection 115%~135% High-temperature protection …… Temperature factor ±0.03%℃(0~50℃) Start, rise and lock time 1ms,30ms,15ms Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft Resistance to pressure Input and output internal:3KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC Isolation resistance Input and output internal, input and enclosure, Output and enclosure:500VAC/100M Ohms Operating temperature and humidity -10℃~+60℃，20%~90%RH Store temperature and humidity -20℃~+85℃,10%~95%RH Overall dimension 199*98*38mm Weight 0.65Kgs Safety standard Meet UL1012,TUV EN60950 EMC standard Conform to IEC801-2,3,4,IEC555-2 Note:1.The testing condition for the parameter above is :230VAC input, rated load, 25℃ 70% RH.Humidity 　　 2.Error.include the setting error, line stability and load stability.(Note:5) 　　 3.Wave test: adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 　　 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 　　 5.Load stability test: The load is from 0% to 100% 　　 6.C3,4,32 must be knocked down.

S-145 SERIES

Low price and high reliability 105℃ output capacitor 　 AC input power suitable for the world 　 High efficiency and low operation temperature 　 Soft-start current can reduce the AC input impact effectively 　 With short-circuit and overload protection 　 100% full-load burning test 　 Installed with EMI filter, minimum wave 　 Model 　 Performance S-145-5 S-145-7.5 S-145-12 S-145-24 DC output voltage 5V 7.5V 12V 24V Output voltage error(Note:2) ±2% ±1% ±1% ±1% Rated output current 25A 18A 12A 6A Output current rage 0-25A(Biggest 30A) 0-18A(Biggest 18A) 0-12A(Biggest 14A) 0-6A(Biggest 7A) Wave and noise(Note:3) 100mVp-p 100mVp-p 100mVp-p 100mVp-p Inlet stability(Note:4) ±0.5% ±0.5% ±0.3% ±0.2% Load stability(Note:5) ±0.5% ±0.5% ±0.3% ±0.2% DC output power 125W 135W 144W 144W Efficiency 78% 80.5% 80.5% 83.5% Adjustable range for DC voltage 4.75-5.5V 6-8V 10.8-13.2V 21-28V Range for input voltage 85~132VAC/180~264VACswitch choice 47~63Hz;255-370VDC Input current 3.2A/115V 1.6A/230V Impact current Cool-start current35A/115V 60A/230V Leakage current <15mA/240VAC Overload protection 125%~168% RESERT: RECYCLE ON/OFF High-temperature protection …… Temperature factor ±0.03%℃(0~50℃) Start, rise and lock time 200ms,100ms,30ms Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft Resistance to pressure Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC Isolation resistance Input and output internal, input and enclosure, Output and enclosure:500VAC/100M Ohms Operating temperature and humidity -10℃~+60℃，20%~90%RH Store temperature and humidity -20℃~+85℃,10%~95%RH Overall dimension 199*98*38mm Weight 0.7Kgs Safety standard Conform to requirement in UL1012 EMC standard ...... Note:1.The testing condition for the parameter above is :230VAC input, rated load, 25℃ 70% RH.Humidity 　　 2.Error.include the setting error, line stability and load stability.(Note:5) 　　 3.Wave test: adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 　　 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 　　 5.Load stability test: The load is from 0% to 100%

AC-DC SINGLE OUTPUT   PAGE1   PAGE2   PAGE3    PAGE4   PAGE5   PAGE6