AC-DC SINGLE OUTPUT   PAGE1   PAGE2   PAGE3    PAGE4   PAGE5   PAGE6

S-150 SERIES

Low price and high reliability 105℃ output capacitor 　 AC input power suitable for the world 　 High efficiency and low operation temperature 　 Soft-start current can reduce the AC input impact effectively 　 With short-circuit and overload protection 　 100% full-load burning test 　 Installed with EMI filter, minimum wave Model 　 Performance S-150-5 S-150-7.5 S-150-9 S-150-12 S-150-13.5 S-150-15 S-150-24 S-150-27 S-150-48 DC output voltage 5V 7.5V 9V 12V 13.5V 15V 24V 27V 48V Output voltage error(Note:2) ±2% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% Rated output current 30A 20A 16.7A 12.5A 11.2A 10A 6.5A 5.6A 3.2A Output current rage 0-30A 0-20A 0-16.7A 0-12.5A 0-11.2A 0-10A 0-6.5A 0-5.6A 0-3.2A Wave and noise(Note:3) 150mVp-p 150mVp-p 180mV 180mV 180mV 180mV 240mV 240mV 240mV Inlet stability(Note:4) ±0.5% ±0.5% ±0.3% ±0.3% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% Load stability(Note:5) ±0.5% ±0.5% ±0.3% ±0.3% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% DC output power 150W 150W 150.3W 150W 151.2W 150W 156W 151.2W 153.6W Efficiency 78% 80% 80% 82% 83% 84% 85% 86% 87% Adjustable range for DC voltage 4.5-5.5V 6-8.3V 8-10.4V 10.6-13.2V 12-15V 13.5-16.5V 21-28V 24-30V 43-53V Range for input voltage 85~132VAC/176~264VAC SELECTED BY JUMPER OR SWITCH 47~63Hz;255~370VDC Input current 3.2A/115V 1.6A/230V Impact current Cool-start current 35A/115V 60A/230V Leakage current <3.5mA/240VAC Overload protection 105%~150% TYPE: PULSING HICCUP SHUTDOWN RESET: reset:self-reset Over-voltage protection 115%~135% High-temperature protection …… Temperature factor ±0.03%℃(0~50℃) Start, rise and lock time 100ms,50ms,20ms Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft Resistance to pressure Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC Isolation resistance Input and output internal, input and enclosure, Output and enclosure:500VAC/100M Ohms Operating temperature and humidity -10℃~+60℃，20%~90%RH Store temperature and humidity -20℃~+85℃,10%~95%RH Overall dimension 199*110*50mm Weight 0.8Kgs Safety standard Meet UL1950,TUV EN60950 EMC standard Conform to CISPR22(EN55022),IEC1000-4-2,3,4,5 IEC1000-3-2 Note:1.The testing condition for the parameter above is :230VAC input, rated load, 25℃ 70% RH.Humidity 　　 2.Error.include the setting error, line stability and load stability.(Note:5) 　　 3.Wave test: adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 　　 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 　　 5.Load stability test: The load is from 0% to 100% 　　 6.C2,3,11 must be knocked down.

S-200 SERIES

Low price and high reliability 105℃ output capacitor 　 AC input power suitable for the world 　 High efficiency and low operation temperature 　 Soft-start current can reduce the AC input impact effectively 　 100% full-load burning test 　 Installed with EMI filter, minimum wave 　 Model 　 Performance S-200-5 S-200-12 S-200-15 S-200-24 S-200-27 DC output voltage 5V 12V 15V 24V 27V Output voltage error(Note:2) ±2% ±1% ±1% ±1% ±1% Rated output current 40A 16.5A 13.3A 8.5A 7.4A Output current rage 0-40A 0-40A 0-13.3A 0-8.5A 0-7.4A Wave and noise(Note:3) 180mVp-p 120mVp-p 120mVp-p 120mVp-p 150mVp-p Inlet stability(Note:4) ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Load stability(Note:5) ±1% ±0.5% ±0.5% ±0.5% ±0.5% DC output power 200W 200W 200W 204W 200W Efficiency 75% 79.5% 80% 81.5% 82% Adjustable range for DC voltage 4.75-5.5V 10.8-13.2V 13.5-16.5V 21.6-26.4V 26-32V Range for input voltage 85~132VAC/176~264VAC BY SWITCH 47~63Hz;248~370VDC Input current 4.2A/115V 2.2A/230V Impact current 30A/115V 60A/230V Leakage current <0.5mA/240VAC Overload protection 110%～160% 105%～150% TYPE Cut off output RESET: RECYCLE AC ON/OFF Over-voltage protection ------ High-temperature protection ------ Temperature factor ±0.03%℃(0~50℃) Start, rise and lock time 200ms,80ms,16ms Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft Resistance to pressure Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC Isolation resistance Input and output internal, input and enclosure, Output and enclosure:500VAC/100M Ohms Operating temperature and humidity -10℃~+60℃,20%~90%RH Store temperature and humidity -20℃~+85℃,10%~95%%RH Overall dimension 150*140*86mm Weight 1.3Kgs Safety standard Meet UL1012 EMC standard ...... Note:1.The testing condition for the parameter above is :230VAC input, rated load, 25℃ 70% RH.Humidity 　　 2.Error.include the setting error, line stability and load stability.(Note:5) 　　 3.Wave test: adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 　　 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 　　 5.Load stability test: The load is from 0% to 100% 　　 6.C3,4 must be knocked down.

S-201 SERIES

Low price and high reliability 105℃ output capacitor 　 AC input power suitable for the world 　 High efficiency and low operation temperature 　 Soft-start current can reduce the AC input impact effectively 　 With short-circuit and overload protection 　 100% full-load burning test 　 Installed with EMI filter, minimum wave 　 Model 　 Performance S-201-5 S-201-7.5 S-201-12 S-201-13.5 S-201-15 S-201-24 S-201-27 S-201-48 DC output voltage 5V 7.5V 12V 13.5V 15V 24V 27V 48V Output voltage error(Note:2) ±2% ±2% ±1% ±1% ±1% ±1% ±1% ±1% Rated output current 40A 26.5A 16.5A 14.7A 13A 8.3A 7.4A 4.2A Output current rage 0-40A 0-26.5A 0-16.5A 0-14.7A 0-13A 0-8.3A 0-7.4A 0-4.2A Wave and noise(Note:3) 150mVp-p 150mVp-p 180mV 180mV 180mV 180mV 240mV 240mV Inlet stability(Note:4) ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Load stability(Note:5) ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% DC output power 200W 198.75W 198W 198.45W 198W 199.2W 199.8W 201.6W Efficiency 74% 79% 80% 80% 81% 83% 83% 84% Adjustable range for DC voltage 4.5-5.6V 6-9V 10-13.2V 12-15V 13.5-18V 20-26.4V 26-32V 41-56V Range for input voltage 90~132VAC/186~264VAC SELECTED BY JUMPER OR SWITCH 47~63Hz;254~370VDC Input current 4.5A/115V 2.5A/230V Impact current 25A/115V 50A/230V Leakage current <3.5mA/240VAC Overload protection 105%~135% TYPE: PULSING HICCUP SHUTDOWN RESET: Recycle ON/OFF Over-voltage protection 5.75-6.75V 9.4-10.9V 13.8-16.2V 15.5-18.2V 18-21V 27.6-32.4V 33.7-39.2V 57.6-67.2V High-temperature protection RTH3>=90℃ OUTPUT SHUTDOWN Temperature factor ±0.03%℃(0~50℃) Start, rise and lock time 200ms,100ms,20ms Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft Resistance to pressure Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC Isolation resistance Input and output internal, input and enclosure, Output and enclosure:500VAC/100M Ohms Operating temperature and humidity -10℃~+50℃，20%~90%RH Store temperature and humidity -20℃~+85℃,10%~95%RH Overall dimension 215*115*50mm Weight 0.9Kgs Safety standard Meet TOUL1950 EMC standard ...... Note:1.The testing condition for the parameter above is :230VAC input, rated load, 25℃ 70% RH.Humidity 　　 2.Error.include the setting error, line stability and load stability.(Note:5) 　　 3.Wave test: adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 　　 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 　　 5.Load stability test: The load is from 0% to 100% 　　 6.C3,4 must be knocked down.

AC-DC SINGLE OUTPUT   PAGE1   PAGE2   PAGE3    PAGE4   PAGE5   PAGE6