AC-DC QUAD OUTPUT

Q-60 SERIES
  • Low price and high reliability
  • 105 output capacitor
  • AC input power suitable for the world
  • High efficiency and low operation temperature
  • Soft-start current can reduce the AC input impact effectively
  • With short-circuit and overload protection
  • 100% full-load burning test
  • Installed with EMI filter,minimum wave
  • Model

    Performance
    CH1 CH2 CH3 CH4
    DC output voltage 5V 12V -5V -12V
    Output voltage error(Note:2) 2% 6% 5% 5%
    Rated output current 5.5A 2A 0.5A 0.5A
    Output current rage 0.5-8A 0.1-3A 0-1A 0-1A
    Wave and noise(Note:3) 100mVp-p 120mVp-p 100mVp-p 120mVp-p
    Inlet stability(Note:4) 0.5% 1% 0.5% 0.5%
    Load stability(Note:5) 0.5% 4% 1% 1%
    DC output power 60W
    Efficiency 70%
    Adjustable range for DC voltage CH1:+10,-5%
    Range for input voltage 85~264VAC/47~63VAC;120~370VDC
    Input current 1.3A/115V 0.8A/230V
    Impact current Cool-start 18A/115V 36A/230V
    Leakage current <1mA/240VAC
    Overload protection 105%~150% Type:Cut off output RESET:SELF-RESET
    Over-voltage protection CH1:5.75~6.75V
    High-temperature protection
    Temperature factor 0.03%(0~50)
    Start,rise and lock time 1.6s,20ms,12ms/115VAC 800ms,20ms,60ms/230VAC
    Vibration resistance 10~500Hz,2G 10min./1cycle,time60, minutes for each shaft
    Resistance to pressure Input and output internal:3KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC
    Isolation resistance Input and output internal,input and enclosure,Output and enclosure:0500VAC/100M Ohms
    Operating temperature and humidity -10~+60棬20%~90%RH
    Store temperature and humidity -20~+85,10%~95%RH
    Overall dimension 159*97*38mm
    Weight 0.55Kgs
    Safety standard Meet UL1950
    EMC standard Conform to IEC801-2,3,4,IEC555-2
    Note:1.The testing condition for the parameter above is :230VAC input,rated load, 25 70% RH.Humidity
    2.Error.include the setting error,line stability and load stability.(Note:5)
    3.Wave test:adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
    4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage.
    5.Load stability test:The load is from 0% to 100%
    6.
    7.C2,3,6 must be knocked down.
    Q-100 SERIES
  • Low price and high reliability
  • 105 output capacitor
  • AC input power suitable for the world
  • High efficiency and low operation temperature
  • Soft-start current can reduce the AC input impact effectively
  • With short-circuit and overload protection
  • 100% full-load burning test
  • Installed with EMI filter,minimum wave
  • Model

    Performance
    Q-100B Q-100H
    CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4
    DC output voltage 5V 12V 24V -12V 5V 12V -5V -12V
    Output voltage error(Note:2) 2% 6% 6% 6% 2% 8% 10% 10%
    Rated output current 8A 1A 2A 0.5A 13A 2A 1A 1A
    Output current rage 2-12A 0.1-1A 0.2-3A 0.1-0.5A 3-13A 0.2-4A 0.1-1A 0.1-1A
    Wave and noise(Note:3) 80mVp-p 120mVp-p 120mVp-p 120mVp-p 100mVp-p 120mVp-p 100mVp-p 120mVp-p
    Inlet stability(Note:4) 0.5% 1% 1% 1% 0.5% 1% 1% 1%
    Load stability(Note:5) 0.5% 5% 5% 5% 0.5% 7% 8% 8%
    DC output power 100W 106W
    Efficiency 76% 76%
    Adjustable range for DC voltage CH1+10,-5% CH1+10,-5%
    Range for input voltage 88~132VAC/170~264VAC
    Input current 3A/115V 15A/230V
    Impact current Cool-start 30A/115V 36A/230V
    Leakage current <0.5mA/240VAC
    Overload protection 105%~150% TYPE:FOLDBACK Cut off output: Self-Reset
    Over-voltage protection
    High-temperature protection
    Temperature factor 0.03%(0~50) ON+5V OUTPUT
    Start,rise and lock time 200ms,50ms,16ms
    Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft
    Resistance to pressure Input and output internal:1.5KVAC, Input and enclosure:1.5KVAC, Output and enclosure:0.5KVAC
    Isolation resistance Input and output internal, input and enclosure, Output and enclosure:500VAC/100M Ohms
    Operating temperature and humidity -10~+60棬20%~90%RH
    Store temperature and humidity -20~+85,10%~95%RH
    Overall dimension 199*110*50mm
    Weight 0.85Kgs
    Safety standard Conform UL1012 Requirement
    EMC standard ......
    Note:1.The testing condition for the parameter above is :230VAC input,rated load, 25 70% RH.Humidity
    2.Error.include the setting error,line stability and load stability.(Note:5)
    3.Wave test:adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
    4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage.
    5.Load stability test:The load is from 0% to 100%
    Q-120 SERIES
  • Low price and high reliability
  • 105 output capacitor
  • AC input power suitable for the world
  • High efficiency and low operation temperature
  • Soft-start current can reduce the AC input impact effectively
  • With short-circuit and overload protection
  • 100% full-load burning test
  • Installed with EMI filter,minimum wave
  • Model

    Performance
    Q-120B Q-120C Q-120D
    CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4
    DC output voltage 5V 12V -5V -12V 5V 15V -5V -15V 5V 12V 24V -12V
    Output voltage error(Note:2) 2% 6% 6% 6% 2% +10,-5% 6% 10,-5% 2% 6% 6% 6%
    Rated output current 11A 4A 1A 1A 10A 3.5A 1A 1A 8A 2A 2A 1A
    Output current rage 2-12A 0.5-5A 0.2-1A 0.2-1A 2-12A 0.5-5A 0.2-1A 0.2-1A 2-12A 0.2-5A 0.2-2A 0.2-1A
    Wave and noise(Note:3) 80mV 120mV 80mV 120mV 80mV 150mV 80mV 150mV 80mV 120mV 180mV 120mV
    Inlet stability(Note:4) 0.5% 1% 1% 1% 0.5% 1% 1% 1% 0.5% 1% 1% 1%
    Load stability(Note:5) 0.5% 5% 5% 5% 0.5% 6% 5% 6% 0.5% 5% 5% 5%
    DC output power 120W 122.5W 124W
    Efficiency 77% 76% 80%
    Adjustable range for DC voltage CH1+10,-5% CH1+10,-5% CH1+10,-5%
    Range for input voltage 88~132VAC/176~264VAC switch choice 47~63Hz;240~370VDC
    Input current 2.5A/115V 1.25A/230V
    Impact current Cool-start current 35A
    Leakage current <3.5mA/240VAC
    Overload protection 105%~135% TYPE:PULSING HICCUP SHUTDOWN RESET:SELF-RESET
    Over-voltage protection CH1:5.75~6.75V
    High-temperature protection
    Temperature factor 0.03%/OC(0~50) ON+5V OUTPUT
    Start,rise and lock time 200ms,50ms,20ms
    Vibration resistance 10~500Hz,2G 3AXES 10min./1cycle,time60,minutes for each shaft
    Resistance to pressure Input and output internal:3KVAC, Input and enclosure:1.5KVAC, Output and enclosure:0.5KVAC
    Isolation resistance Input and output internal, input and enclosure, Output and enclosure:500VAC/100M Ohms
    Operating temperature and humidity -10~+60棬20%~90%RH
    Store temperature and humidity -20~+85,10%~95%RH
    Overall dimension 1999*110*50mm
    Weight 0.86Kgs
    Safety standard Meet UL1012
    EMC standard Conform to EN5502,IEC801-2,3,4,IEC55-2
    Note:1.The testing condition for the parameter above is :230VAC input,rated load, 25 70% RH.Humidity
    2.Error.include the setting error,line stability and load stability.(Note:5)
    3.Wave test:adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
    4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage.
    5.Load stability test:The load is from 0% to 100%}
    6.
    7.C2,3,11 must be knocked down.
    Q-180 SERIES
  • Low price and high reliability
  • 105 output capacitor
  • AC input power suitable for the world
  • High efficiency and low operation temperature
  • Soft-start current can reduce the AC input impact effectively
  • With short-circuit and overload protection
  • 100% full-load burning test
  • Installed with EMI filter,minimum wave
  • Model

    Performance
    CH1 CH2 CH3 CH4
    DC output voltage 5V 12V 24V 12V
    Output voltage error(Note:2) 2% 6% 5% 8%
    Rated output current 8A 2A 4A 1A
    Output current rage 1-10A 0.2-2A 0.5-5A 0.1-1A
    Wave and noise(Note:3) 80mVp-p 150mVp-p 200mVp-p 180mVp-p
    Inlet stability(Note:4) 0.5% 1% 1% 1%
    Load stability(Note:5) 0.5% 4% 5% 6%
    DC output power 172W
    Efficiency 80%
    Adjustable range for DC voltage CH1:10%
    Range for input voltage 88~132VAC/176~264VAC BY SWITCH 47~63Hz;248~370VDC
    Input current 4A/115V 2A/230V
    Impact current Cool-start current 30A/115V 60A/230V
    Leakage current <0.5mA/240VAC
    Overload protection 105%135% TYPE RESET:RECYCLE AC ON/OFF
    Over-voltage protection ------
    High-temperature protection ------
    Temperature factor 0.03%(0~50) ON +5V OUTPUT
    Start,rise and lock time 200ms,50ms,16ms
    Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft
    Resistance to pressure Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC
    Isolation resistance Input and output internal,input and enclosure,Output and enclosure:500VAC/100M Ohms
    Operating temperature and humidity -10~+50,20%~90%RH
    Store temperature and humidity -20~+85,10%~95%%RH
    Overall dimension 150*140*86mm
    Weight 1.28Kgs
    Safety standard Meet UL1012
    EMC standard ......
    Note:1.The testing condition for the parameter above is :230VAC input,rated load, 25 70% RH.Humidity
    2.Error.include the setting error,line stability and load stability.(Note:5)
    3.Wave test:adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
    4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage.
    5.Load stability test:The load is from 0% to 100%
    6.C3,4 must be knocked down.